PR V1 (M)

Çelik Çekme Boru, Metrik, 1.4301

The product image may differ

Malzeme

stainless steel X5CrNi18-10 (1.4301 / AISI 304)

Model

Metrik ölçü birimleri

Model

precision steel tube, seamless, (cold-drawn), metric

PDF'in indirin

Lütfen bir model seçin

Ürün tablosunu göster

PR 04-1 V1 PR 05-1 V1 PR 06-1 V1 PR 06-1.5 V1 PR 08-1 V1 PR 08-1.5 V1 PR 10-1 V1 PR 10-1.5 V1 PR 12-1 V1 PR 12-1.5 V1 PR 12-2.5 V1 PR 12-2 V1 PR 12-3 V1 PR 14-2 V1 PR 14-2.5 V1 PR 14-3 V1 PR 15-1.5 V1 PR 16-1 V1 PR 16-2 V1 PR 18-1 V1 PR 18-1.5 V1 PR 18-2 V1 PR 20-2 V1 PR 22-1 V1 PR 22-1.5 V1 PR 22-2 V1 PR 24-2 V1 PR 25-5 V1 PR 28-1 V1 PR 28-2 V1 PR 28-3 V1 PR 28-4 V1 PR 30-2 V1 PR 30-3 V1 PR 30-4 V1 PR 30-5 V1 PR 38-4 V1 PR 40-4 V1 PR 40-5 V1 PR 42-2 V1 PR 42-3 V1 PR 50-1.5 V1 PR 50-2 V1 PR 57-2 V1 PR 64-2 V1 PR 70-2 V1

Özellikler

Malzeme

stainless steel X5CrNi18-10 (1.4301 / AISI 304)

Model

Metrik ölçü birimleri

Model

precision steel tube, seamless, (cold-drawn), metric

Model özelliği

CFA = bright annealed (annealed, metallically bright)

Standart

DIN EN 10216-5

Boru uzunluğu

5 to 7 metres*.

Customs tariff number

73044100

Tüm özellikler

Ürün açıklaması

Uyarılar

Verilen Basınç Değerleri, Düz Borular İçin Geçerlidir.
Boru Bükümlü Olduğunda Uygun Boru Et Kalınlıklarının, DIN EN 13480-4'e Analog bir Şekilde Hesaplanması Gerekir.
*Stainless steel tubes are supplied in manufactured lengths according to EN 10216-5. In terms of production, these are usually 6 meters (+/- 1m). Order quantities are rounded to the nearest possible total length, without cutting.

Açıklama

The stainless steel pipes made of materials 1.4301 / AISI 304 (V1), 1.4541 / AISI 321 (V2) and 1.4571 / AISI 316Ti (V4) are supplied in CFA condition (bright annealed) as standard. This condition offers very good bendability and is the established standard in the hydraulics sector, particularly for the installation of pipelines.
Our stainless‑steel tubes are tested according to DIN EN 10216‑5. The dimensional tolerances (Ø, wall thickness, ovality) are restricted in accordance with DIN EN 10305‑1 ranging from 4 to 42 mm in outer diameter (Ød1). Larger dimensions are classified according to EN ISO 1127 D3/T.

Ek bilgiler

Analog hesaplama DIN 2413
Specific load I: static (up to 120 °C)
Specific load III: dynamic (up to 120°C)
Working stroke= P bar
Strength parameter: K 218 [N/mm²]
Safety coefficient: S 1.5
Fatigue strength: σSch/D 175 [N/mm²]
Tolerances (Ø, wall thickness, ovality) in accordance with DIN EN 10305-1
Elastic strength to DIN DIN 10216-5 Rp 1.0 to 50°C
Sürekli kabarma sağlamlık değeri, 1.4571 sertlik nominal değeri oranında azaltılmıştır.

Sipariş notu

Other delivery conditions, such as CFD, are available on request and must be specified separately.
Other delivery conditions, such as CFD, are available on request and must be specified separately.