Ne arıyorsunuz?

Aranan kelimeyi girin

Üzgünüz!

Arama sonucu bulunamadı.

Oturum açma

Yeni müşteri misiniz?

Kaydolun ve birçok avantajdan yararlanın:

Ürünün kullanılabilirliğinin kontrolü
Hızlı ek sipariş imkanı ve sipariş geçmişi
Kişisel ürün tavsiyeleri
Faturaya göre ödeme

Help & Contact

Your direct line to us

If you have any questions about the online store or our products, you can call our customer service at:

Monday - Thursday: 8:00AM - 5:00PM
Friday: 8:00AM - 4:00PM
Except saturdays, sundays and holidays

Or use our FAQ

There you get answers to the most frequently asked questions.

Helping people help themselves
SSS

KTF 300

PTFE hose
Application
high-pressure applications with different media, 2-component glue and aggressive media 
Application
mainly for the adhesive industry, surface treatment, heater hose systems. 
Approval
The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
PDF'in indirin

Özellikler

Application
  • high-pressure applications with different media, 2-component glue and aggressive media 
Application
  • mainly for the adhesive industry, surface treatment, heater hose systems. 
Approval
  • The base material has an FDA-approval, EG 1935/2004 and EU 10/2011. 
Braiding
  • two-braided of steel wire, bronzed, one layer of steel wire galvanised 
Design
  • smooth inliner in white PTFE 
  • thick-walled 
Features
  • smooth inner liner 
Hose material
  • PTFE (Polytetrafluoroethylene) 
Temp.
  • applies only to the hose 
Temp. max.
  • 200 °C
Temp. min.
  • -70 °C
Tüm özellikler

Ürün açıklaması

Uyarılar
The pressure values listed apply to hoses only.
The pressure reduction factor must be taken into account from 50 °C.
(Max. working pressure = working pressure x factor)
Temp.: 100 °C / 150 °C / 200 °C
Factor: 0.95 / 0.90 / 0.83
If the hose assembly is being used as steam hose, the maximum operating pressure is 14 bar (203 psi) and the temperature +250 °C (+482 °F)
Temperature correction factors water vapour:
Temp.: 20 °C / 100 °C / 150 °C / 200 °C
Factor: 1.0 / 0.95 / 0.90 / 0.83.
With dynamic load the bend radius should be doubled at minimum. The radius should be adapted according to the conditions.
KTF-hoses do not have a cover and wires are not corrosion-protected. The usage as a sole hose assembly without measures, which excludes corrosion of the wires, is not permitted due to possible risk of injuries and can lead to failure of the hose assembly.
Sipariş notu
Other designs available on request

Product variants

8 Results
Ölçü çizimini gösterin
Tanım
Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
6.2 mm
11.2 mm
60 mm
2,000 bar
Daha fazla bilgi edinin
8 mm
13.4 mm
85 mm
1,900 bar
Daha fazla bilgi edinin
10 mm
15.7 mm
110 mm
1,900 bar
Daha fazla bilgi edinin
12.2 mm
18.8 mm
150 mm
1,800 bar
Daha fazla bilgi edinin
15.1 mm
21.6 mm
175 mm
1,600 bar
Daha fazla bilgi edinin
20.2 mm
27.8 mm
200 mm
1,200 bar
Daha fazla bilgi edinin
24.2 mm
31.7 mm
240 mm
1,100 bar
Daha fazla bilgi edinin
31.9 mm
39.3 mm
280 mm
1,000 bar
Daha fazla bilgi edinin

Column selection

Inside Ø (mm)
Outside Ø (mm)
Bend radius min. (mm)
Burst pressure (bar)
Test pressure (bar)
Weight per m (kg)
Working pressure 20 °C (stat.) (bar)